how to clean samsung top load washer filter

How to Clean Samsung Top Load Washer FilterSamsung top load washer filter is an essential part of the washing machine that plays a vital role in keeping its performance at its best. It helps to catch debris and lint from the laundry, which can accumulate over time and affect the machine's performance. However, many homeowners often overlook the filter, and this can lead to clogging, slow drainage, and even break down of the washing machine. In this article, we will share helpful tips and tricks on how to clean Samsung top load washer filter and keep the machine performing at its best.Cleaning the Samsung Top Load Washer FilterStep 1: Turn off the Washing MachineBefore cleaning the filter, make sure the washing machine is turned off. Unplug the machine from the power source or switch off the circuit breaker. This will help avoid electrocution or even damage to the washing machine.Step 2: Locate the FilterThe Samsung top load washer filter is located at the bottom of the washing machine. Depending on the model, you may need to remove the front or back panel to access the filter. To remove the front panel, use a putty knife or flathead screwdriver to release the clips that hold the panel in place. To remove the back panel, take out the screws holding it in place.Step 3: Remove the FilterOnce you have access to the filter, locate the knob, which is usually at the center of the filter. Turn the knob counterclockwise to remove it. Be sure to have a small container or towel nearby to catch any water or debris that may spill out.Step 4: Clean the FilterAfter removing the filter, rinse it under running water to remove any debris, dirt, or lint that may have accumulated. Use a soft-bristled brush to clean stubborn dirt or debris that may have stuck on the filter.Step 5: Reinstall the FilterOnce you have cleaned the filter, reinsert it back into the washing machine. Make sure it is inserted correctly and turn the knob clockwise to lock the filter in place.Step 6: Test the MachineAfter cleaning the filter, turn on the washing machine and run a test cycle to ensure it is running correctly. Check for any leaks, unusual noises, or signs of damage that may need further attention.ConclusionCleaning the Samsung top load washer filter is a simple process that can help to improve the machine's performance and service life. It is recommended to clean the filter at least once a month or more often for heavily used washing machines. By following the steps, we have outlined in this article; you can keep your washing machine at its best and avoid costly repairs or even replacement.