how to load surebonder easy tacker staple gun

The Surebonder Easy Tacker Staple Gun is an essential tool for DIY enthusiasts, woodworkers and professional craftsmen. It is a reliable and high-performance tool that can help complete various projects quickly and efficiently. However, loading the staple gun can be a bit tricky, especially if you are using it for the first time. The good news is that loading the Surebonder Easy Tacker Staple Gun is not complicated, and with a little guidance, you can load it like a pro. In this article, we provide a comprehensive guide on how to load the Surebonder Easy Tacker Staple Gun.

Gathering the Supplies

Before you begin loading the staple gun, you need to gather the necessary supplies. The Surebonder Easy Tacker Staple Gun uses T50-style staples, so make sure you have the correct staples for the job. You can get them from a hardware store or an online retailer. Apart from the staples, you will also need a flathead screwdriver to open the staple channel and a pair of pliers to remove any lodged staples.

Loading the Surebonder Easy Tacker Staple Gun

Now that you have gathered the necessary supplies let’s get to the loading process. Firstly, ensure that the staple gun is unplugged from the power source if it is an electric one. Next, locate the staple channel that is usually at the bottom of the staple gun. Use the flathead screwdriver to open it by gently prying it open. Be careful not to damage the staple channel.Once the staple channel is open, insert the staples into the channel with the flat side facing down. Ensure that the staples are pushed down to the bottom of the channel, and they are straight. You can use your fingers to align or position them correctly.After inserting the staples, close the staple channel by pressing it back into position. Ensure it clicks or snaps shut. Finally, plug the staple gun back in, and you are ready to start your project.

Troubleshooting

If you encounter any issues loading the staple gun or using it, there are several things you can do to solve the problem. Firstly, check that you are using the correct size and type of staples. Secondly, inspect the staple channel and ensure it is clean and free from obstructions. If you find any lodged staples in the channel, use the pliers to remove them. You can also check the user manual for any troubleshooting tips.

Conclusion

In conclusion, loading the Surebonder Easy Tacker Staple Gun is an easy and straightforward process. It is a critical step that you ought to master to avoid any hiccups when using this tool. Always ensure that you use the right size and type of staples to prevent any damage to the staple gun. We hope this comprehensive guide has provided you with adequate information on how to load the Surebonder Easy Tacker Staple Gun. Happy stapling!"