how to replace shocks on lg front load washer
Release time：2023-06-28 21:45:45
Page View：
author：Yuxuan
If you own a LG front load washer, you know how important it is to keep it functioning properly. Replacing the shocks on your LG Front Load Washer can extend the life of the appliance and keep it running efficiently. While it may seem like a complicated task, with the right tools and steps, you can replace the shocks on your LG front load washer in no time. In this article, we will provide you with a step-by-step guide on how to replace shocks on LG Front Load Washer.
Step 1: Prepare Your Washer
Before you begin the process of replacing shocks on your LG front load washer, make sure the appliance is unplugged. This will ensure your safety during the repair process. You will also need to tip your washer back to access the shocks. To do this, prop the front of the washer up with a wooden block, or you can use a jack stand. The back of the washer should remain on the ground to prevent any potential injuries.Step 2: Remove the Old Shocks
To remove the old shocks, you need first to locate them. The shocks are located at the bottom of the washer, on both sides. You can find them easily by looking for the four plastic pins that hold them in place. Use a screwdriver to pry the pins off, then pull the old shocks out of the appliance.Step 3: Install New Shocks
Once you have removed the old shocks, it's time to install the new ones. Align the new shocks with the pins and push them in until they snap into place. Make sure that the shocks are secure and in the right position before you proceed to the next step.Step 4: Lower Your Washer
After you have installed the new shocks, it's time to lower your washer back onto the ground. Gently lower the appliance, and be sure that it is level. Remove any tools or props that you have used to support the washer.Step 5: Test Your Washer
After installing the new shocks and lowering your washer onto the ground, plug it back in and test it. Turn it on and let it run through a cycle, making sure that there is no excess vibration or noise. If you notice any issues, re-examine the shocks to ensure that they are installed correctly.Conclusion
Replacing shocks on your LG front load washer isn't as complicated as you may think. With the right tools and steps, you can replace the shocks on your washer and ensure that it functions properly. Following these steps can help to extend the life of your appliance, prevent costly repairs, and save you time and money in the long run.
