how to load spool on ryobi 40v trimmer

Ryobi 40V trimmer is a popular and powerful tool for keeping your garden and lawn neat and tidy. It is equipped with a spool that feeds the line to trim the grass from the cutting head. However, if you are a new user, you might find it challenging to load a spool on a Ryobi 40v trimmer. In this article, we will provide you a step-by-step guide on how to load spool on Ryobi 40v trimmer.

Step 1: Turn off the Trimmer

Before you start loading the spool, turn off the trimmer and unplug the battery to ensure your safety. This is a crucial step as a running trimmer can cause serious injuries.

Step 2: Remove the Spool Cap

Once you have turned off the trimmer, locate the spool cap on the trimmer head. The spool cap holds the spool in position and can be removed by turning it counterclockwise. Use your hand or a wrench to remove the spool cap.

Step 3: Remove the Old Spool

After you have removed the spool cap, take out the old spool inside the trimmer head. If the spool is empty, then remove it entirely. However, if the spool is not empty, you can rewind it or replace it with a new one.

Step 4: Prepare the New Spool

If you are using a new spool, then you need to prepare it before loading it into the trimmer head. First, remove the protective cover from the spool. Then, remove any twists or tangles from the line. Finally, insert the line into the desired holes on the spool, following the pattern mentioned in the instructions manual.

Step 5: Load the New Spool

Now that your new spool is prepared, load it into the trimmer head. Insert one end of the line into the hole in the trimmer head, and then feed the line through the cutting head until it emerges from the other side. Turn the spool slightly to engage the spool retainer and keep the line in place.

Step 6: Replace the Spool Cap

Once you have loaded the spool, the final step is to replace the spool cap. Align the cap with the groove on the trimmer head and twist it clockwise until it is secured. Make sure that the cap is tightly secured to prevent the spool from coming out.

Conclusion

Loading a spool on Ryobi 40V trimmer might seem daunting at first, but following the instructional manual and the steps mentioned above can make it an easy and quick task. Ensure that you follow the steps correctly to prevent any safety hazards and keep your garden looking neat and tidy.