how to load san jamar paper towel dispenser

San Jamar paper towel dispensers are common in commercial and industrial settings, such as restaurants, schools, and hospitals. These dispensers are designed to hold large quantities of paper towels, which makes them convenient for high-traffic areas. However, loading a San Jamar paper towel dispenser can be tricky if you've never done it before. In this article, we'll walk you through the steps of loading a San Jamar paper towel dispenser so you can do it with ease.

Step 1: Open the Dispenser

The first step to loading a San Jamar paper towel dispenser is to open the dispenser. Find the lever or tab on the bottom of the dispenser that releases the cover. You may need to use a key to unlock the dispenser if it is locked. Once you have located the lever or tab, press it down or release it, depending on the type of dispenser you have. The cover should open, exposing the inside of the dispenser where the paper towels go.

Step 2: Load the Paper Towels

After opening the dispenser, take out the old roll of paper towels, if there is one, and discard it. Then, take the new roll of paper towels and place it inside the dispenser, making sure to drop the paper towel core onto the dispenser spindle. The spindle is located in the center of the dispenser and holds the paper towels in place. Make sure the roll is centered on the spindle and that the paper towels are facing down towards the bottom of the dispenser. Pull the end of the paper towel through the dispenser slot before closing the dispenser cover.

Step 3: Close the Dispenser

Once you have loaded the paper towels onto the dispenser spindle, it's time to close the dispenser cover. Make sure the cover is aligned with the dispenser body and push or slide it into position. Secure the cover with the lock or latch, if applicable.

Step 4: Test the Dispenser

After loading the dispenser, you can test it to ensure that it's working correctly. Pull down on the end of the paper towel and watch as the towel feeds out of the dispenser. If the paper towel comes out smoothly and without tearing, the dispenser is working properly. If not, check to make sure that the roll is centered on the spindle and that the paper towels are not bunched up inside the dispenser.

Conclusion

Loading a San Jamar paper towel dispenser is a straightforward process once you know how to do it. By following the steps outlined in this article, you can confidently load your San Jamar dispenser with ease. Remember to open the dispenser, load the paper towels onto the spindle, close the dispenser, and test it to ensure proper functioning. With these simple steps, you'll be able to keep your paper towel dispenser stocked and ready for use.