Samsung washers have been around for years and are well-known for their efficiency and exceptional performance. However, like any other appliance, they require maintenance and the occasional cleaning. One of the things that need to be done is to drain the washer. This task can seem daunting at first, especially if you have never done it before. But with the right steps, you can easily drain a Samsung washer top load on your own. In this article, we will guide you through the process.
Step 1: Unplug the Washer
Before you do anything, ensure that the washer is unplugged. This will help to avoid any accidents that may occur when preparing the washer for draining. Safety should always come first, so make sure that you unplug the washer before proceeding with any other steps.
Step 2: Manually Drain the Water inside the Washer
In case the washer has water inside, you will have to drain it manually before any other step. This can be accomplished in two ways:
- If the washer is filled with water, you can use a cup or bucket to scoop out the water.
- Alternatively, you can use a small hosepipe to siphon off the water. To do this, insert one end of the hosepipe into the washer drain pipe and use your mouth to suck the other end. As soon as water comes out, gravity should take over and allow the siphoning process to continue.
Step 3: Locate the Washer Drain Hose
The next step is to locate the washer drain hose. This hose is a flexible and long pipe that is usually found at the back of the washer. The hose is responsible for draining the washer, and it needs to be positioned over the draining area.
Step 4: Position the Hose over the Drain
Once you have located the drain hose, the next step is to position it over the drain. There are two ways to do this:
- The first method involves placing the hose into the sink or bathtub and allowing the water to drain out. To do this, insert one end of the hose into the drain and position the other end into the sink or bathtub. This will allow the water to flow into the draining area, and the washer will be emptied.
- The second method requires a bucket. To do this, position the hose into the bucket and secure it with a clamp or a string. Ensure that the hose is securely fastened to the bucket to prevent any accidents that may occur when the bucket is full.
Step 5: Open the Washer Drain Pump Filter
The final step is to locate the washer drain pump filter, which is usually located on the lower front of the machine. Once you have located it, open the filter and allow any remaining water to drain out. The filter is usually easily removable, and the process should not take more than a few minutes.In conclusion, draining a Samsung washer top load is simple, and you can do it yourself without any professional help. The process involves unplugging the washer, manually draining the water inside the machine, locating and positioning the washer drain hose, and finally opening the washer drain pump filter. By following these simple steps, you will ensure that your washer stays in good condition and performs efficiently.
