how to load remington 1100

The Remington 1100 is one of the most reliable and popular firearms ever made. It is a semi-automatic shotgun that has been popular with hunters and sportsmen for many years. Knowing how to load a Remington 1100 is a critical skill that any gun owner should master. In this article, we will go over the process in detail and explain the steps that you need to follow.

Step 1: Safety First

Before you begin to load your Remington 1100, you must always ensure that the gun is unloaded and the safety is engaged. Check both the chamber and the magazine tube to confirm that there are no shells in the gun. Even if you know there are no shells in the gun, always double-check. Once you have confirmed that the gun is unloaded, engage the safety before beginning to load it.

Step 2: Loading the Magazine Tube

Loading the magazine tube is the first step in loading a Remington 1100 shotgun. First, hold the shotgun in your dominant hand, and hold the magazine cap with your non-dominant hand. Turn the cap counterclockwise to remove it from the shotgun. As you remove the cap, be careful, as a spring-loaded follower will push against the cap. Once the cap is removed, you can begin to load your shells into the magazine tube. Make sure to center the shells in the magazine tube and push them all the way down to the end, leaving enough space for the last shell to be pushed in. Once you have loaded the desired number of shells into the magazine tube, replace the magazine cap by turning it clockwise until it is tight.

Step 3: Loading the Chamber

After you have loaded the magazine tube, the next step is to load the chamber. To do this, pull the forend all the way back until the bolt is locked in the rear position. Once the bolt is locked, you can insert a shell into the ejection port on the right side of the receiver. Push the shell all the way into the chamber until it clicks into place. After you have inserted the shell, release the forend by pushing it forward. This will release the bolt and allow it to close, chambering the shell.

Step 4: Engage the Safety and Be Ready to Shoot

After the magazine tube and chamber are loaded, the final step is to engage the safety and be ready to shoot. Make sure the safety is engaged before you take aim at your target. Always point your shotgun in a safe direction, and be sure of your target and what is beyond it before disengaging the safety and firing.

Conclusion

Knowing how to load a Remington 1100 shotgun is an essential skill that every gun owner should master. The process is relatively straightforward, but it is critical to ensure that the gun is unloaded and the safety is engaged before beginning to load it. By following the steps outlined in this article, you can safely and effectively load your Remington 1100 shotgun and be ready to take your shot. Remember always to practice safe gun-handling techniques and enjoy your time in the field or at the range.