how to drain water from samsung top load washing machine
Release time：2023-06-27 02:07:15
Page View：
author：Yuxuan
Samsung top load washing machines are a great investment for any household. However, it is essential to ensure that you know how to properly drain the water from the machine. This can prevent any damage or potential leaks. In this article, we will guide you through the steps on how to drain water from a Samsung top load washing machine.
Step 1: Turn Off the Power
The first step is to turn off the power to the washing machine. This can be done by unplugging the machine from the power outlet or turning off the circuit breaker.Step 2: Locate the Drain Hose
Next, locate the drain hose at the back of the washing machine. The hose is usually made of plastic and is connected to the back of the machine. Step 3: Position the Drain Hose
Position the end of the drain hose in a sink, bathtub, or any other suitable drainage outlet. Make sure the hose is securely placed to avoid any spills or leaks.Step 4: Remove the Cap
Remove the cap from the end of the drain hose. This cap is usually made of plastic and can be found at the end of the hose. By removing the cap, you will allow the water to flow freely out of the machine.Step 5: Open the Lid
Open the lid of the washing machine to allow air to enter the machine. This will help the water flow out easier.Step 6: Start Draining the Water
Turn on the washing machine and set it to the spin cycle. This will help to drain the water from the machine. Allow the machine to run until all the water has been drained out of the machine.Step 7: Turn Off the Washing Machine
Once all the water has been drained out of the machine, turn off the machine and unplug it from the power outlet.Conclusion
Draining the water from a Samsung top load washing machine is an important aspect of maintaining the machine. By following the steps outlined in this article, you can ensure that the machine is drained properly and without any leaks or spills. Remember to take care when positioning the drain hose and removing the cap to avoid any potential accidents.
