A tape gun is a useful tool for sealing packages and boxes. It makes the task of applying tape to a box much easier, quicker and more efficient. In order to use a tape gun, you need to know how to load the tape into the gun. In this article, we will go over the steps to load tape into a tape gun so that you can start using this valuable tool in your everyday packaging needs.
Step 1: Get Your Tape Gun Ready
The first step in loading tape into a tape gun is to make sure that the gun is ready to receive the tape roll. You should first ensure that the tape holding plate is in the up position, and the blade is retracted. This will make it easier to insert the tape roll into the gun.
Step 2: Insert the Tape Roll
Once you have the tape gun ready, you can now insert the tape roll. Locate the tape roll holder on the bottom of the tape gun. Ensure that the roll is aligned properly with the holder so that it’s centered. Gently place the roll onto the holder and push it down until it clicks into place.
Step 3: Thread the Tape
After you’ve loaded the roll of tape, you need to thread the tape through the dispenser. Pull the tape end over the tape guide and under the roller. Make sure that the tape is facing downward towards the cutting blade. Pull the tape out and over the tape plate, then through the guide slot.
Step 4: Ready to Use
Now that the tape is loaded and threaded properly, you can start using the tape gun. Pull the trigger and apply the tape onto your package or box. The tape gun will automatically cut the tape to the required length. Continue using the gun until all sides of the box are taped shut.
Conclusion
Knowing how to load tape into a tape gun is essential in order to efficiently use this tool for sealing packages. By following the above-given steps, you can easily load tape onto your tape gun. Once the tape gun is loaded, you can quickly and easily seal packages, boxes, and envelopes.
"