how to remove spring loaded door hinges

Spring-loaded door hinges are commonly used in homes and offices because of their ability to automatically close doors. However, if you need to remove a spring-loaded hinge, it can be quite challenging if you don't know what you're doing. In this article, we will cover the steps on how to remove spring-loaded door hinges.

Tools Needed

The tools you will need for this project include a flathead screwdriver, a Phillips screwdriver, a hammer, pliers, and a drill. It's important to have all of the necessary tools before starting the project to avoid interruptions.

Step 1: Locate the Hinge Pins

The first step to removing a spring-loaded door hinge is to locate the hinge pins. These are the metal rods that connect the two hinges together. To do this, you need to open the door and look at the hinge. The hinge pins are usually located at the top and bottom of the hinge.

Step 2: Remove the Pins

After locating the hinge pins, use a flathead screwdriver to wedge under the hinge pin and gently tap with a hammer until the hinge pin is loose. You can then use pliers to remove the pin completely from the hinge. Repeat this process for all of the hinge pins on the door.

Step 3: Unscrew the Hinges

Once all of the hinge pins are removed, it’s time to unscrew the hinges from the door frame and door itself. Use a Phillips screwdriver to unscrew all of the screws that hold the hinges in place. Be sure to keep these screws in a secure place as they will be needed when you re-attach the hinges.

Step 4: Remove the Hinges

With the screws removed, you can now remove the hinges from the door and door frame. The door hinge can now be detached from the door by gently prying it away from the door using a flathead screwdriver. Do the same for the hinge on the door frame.

Conclusion

Removing spring-loaded door hinges can be tricky, but with the proper tools and steps, it's easy to complete. Remember to take note of the screws and hinge pins for proper re-assembly. Now that you’ve successfully removed the spring-loaded door hinges, you can either replace them with new ones or continue with your project.