how to load 11x17 paper in brother mfc j6920dw

Brother MFC J6920DW is a printer that is perfect for small offices and home users. This printer comes with a lot of features such as automatic duplex printing, scanning, copying, and faxing. However, if you are new to this printer, you might face issues while loading 11x17 paper. In this article, I will guide you on how to load 11x17 paper in Brother MFC J6920DW.

Step-by-Step Guide

Step 1: Adjust the paper trayFirst, you need to adjust the paper tray according to the size of the paper. Open the paper tray and slide the paper guides to the edges of the tray. Make sure they are locked in place so that they don't move when you load the paper.Step 2: Load the paper into the trayNow, take the 11x17 paper and load it into the paper tray. Place it in the tray with the short edge facing the front and the long edge along the side of the tray. Make sure the paper is aligned with the guides and the corners of the paper are touching the corners of the tray.Step 3: Adjust the rear guideNext, adjust the rear guide according to the size of the paper. Push the rear guide to the back of the tray so that it touches the paper. This will prevent the paper from shifting while printing.Step 4: Select paper size in the printer settingsAfter loading the paper, you need to select the 11x17 paper size in the printer settings. Go to the printer settings and select the paper size as 11x17. This will ensure that the printer uses the correct paper size while printing.Step 5: Start printingFinally, you can start printing your document. Make sure you select the correct paper tray and paper size in your print settings before printing.

Troubleshooting

If your printer is not detecting the 11x17 paper, make sure the paper tray is properly adjusted, the guides are touching the paper, and the rear guide is properly aligned. Also, make sure you have selected the 11x17 paper size in the printer settings.If the paper is jamming, make sure you have properly loaded the paper and that it is aligned with the guides. Also, check if there are any torn pieces of paper and remove them.

Conclusion

Loading 11x17 paper in Brother MFC J6920DW is easy. You need to adjust the paper tray and load the paper with the short edge facing the front and the long edge along the side of the tray. Additionally, make sure the paper is aligned with the guides and the corners of the paper are touching the corners of the tray. Finally, select the paper size in the printer settings and start printing. If you face any issues, follow the troubleshooting steps mentioned in this article.