how to bleed brakes on yale forklift

Yale forklifts are powerful industrial trucks that are commonly used in warehouses and factories. These machines use hydraulic brakes, which require regular maintenance to function properly. Bleeding the brakes is one maintenance task that is often required to ensure optimal brake performance. In this article, we will discuss how to bleed brakes on a Yale forklift.

Why Bleed Brakes?

Bleeding brakes is the process of removing air bubbles that may form in the brake lines. Air bubbles in the brake lines can compromise the performance of the brakes, and may cause them to fail completely. Bleeding the brakes ensures that the brake system is free of air and operating at its full capacity. This is especially important in high-stress, industrial environments where safety is a top priority.

What You Will Need

To bleed brakes on a Yale forklift, you will need several tools and supplies. These include:- A floor jack- Two jack stands- A wrench- Brake fluid- Clear plastic tubing- A container to catch the old brake fluid

The Bleeding Process

1. Prepare the forklift for maintenance by parking it on a level surface and engaging the parking brake.2. Locate the brake bleed valve on each wheel. You will find it near the brake caliper or wheel cylinder.3. Remove the wheel on the first brake you plan to bleed.4. Attach the clear plastic tubing to the brake bleed valve and run it into the container you prepared earlier.5. Have an assistant press and hold the brake pedal while you open the brake bleed valve with your wrench. If air bubbles are present, you will see them escaping through the plastic tubing.6. Close the brake bleed valve and instruct your assistant to release the brake pedal.7. Repeat steps 5-6 until all air bubbles have been removed from the brake line.8. Move to the next wheel and repeat steps 3-7 until all brakes have been bled.9. Refill the brake fluid reservoir as needed, being careful not to overfill it.10. Test the brakes to ensure they are functioning properly.

Precautions

When bleeding brakes on a Yale forklift, it is important to take certain precautions to ensure your safety. Always wear gloves and eye protection, as brake fluid can be harmful to the skin and eyes. Never reuse old brake fluid, as it can contain contaminants that may compromise the integrity of the brake system. Additionally, never operate the forklift without first testing the brakes to ensure they are functioning properly.

Conclusion

Bleeding the brakes on a Yale forklift is a simple maintenance task that can be easily performed with the right tools and supplies. By following the steps outlined in this article, you can ensure that your forklift brakes are operating at their full capacity, and that your work environment is safe and efficient. Remember to take proper precautions and always test the brakes before operating the forklift.