If you are looking for a stabilizer for your camera or smartphone, then the Zhiyun Crane is an excellent choice. This device helps you to achieve stable and smooth shots, eliminating shaky videos with ease. However, setting up the Zhiyun Crane for the first time can be a little tricky, which is why we've created this step-by-step guide to help you through the process.
Step 1: Unpacking the Zhiyun Crane
Before you get started, unpack all the components from the box and make sure you have everything required to assemble the crane. The standard package should include the gimbal, battery, battery charger, USB cable, carrying case, and mount accessories for your camera or smartphone. You'll also find an instruction manual that covers important information about the Zhiyun Crane.
Step 2: Installing the Camera Mount Plate
The next step is to install the mount plate for your camera or smartphone. Start by removing the screw from the bottom of the mount plate and attach it to the camera's tripod socket. You can then mount your camera onto the plate and tighten the screw to secure it in place. If you're using a smartphone, you'll need to attach the phone holder to the mount plate first.
Step 3: Balancing the Camera
Once you've installed the mount plate, you'll need to balance your camera on the gimbal. To do this, loosen the thumb screw on the side of the crane and adjust the slide plate to center the camera's gravity point. Make sure the camera is level by using the bubble level on the side of the crane, and then tighten the thumb screw to secure the camera in place.
Step 4: Powering on the Zhiyun Crane
The next step is to power on the Zhiyun Crane. To do this, slide the power button to the right side of the crane. Once the device is powered on, you'll see an LED light in the middle of the joystick, which indicates the remaining battery level. If the LED light is flashing, it means the battery is low and needs to be charged.
Step 5: Calibrating the Zhiyun Crane
Before you start using the Zhiyun Crane, it's essential to do a calibration to ensure the device is working correctly. To calibrate the crane, simply press the function button twice to enter calibration mode. Hold the gimbal stationary until the LED light begins to flash, indicating that the calibration is complete.
Conclusion
Setting up the Zhiyun Crane may seem daunting, but by following these simple steps, you'll be up and running in no time. Remember to always check the battery level before a shoot, and calibrate the gimbal regularly to ensure it's working accurately. With the Zhiyun Crane, you'll be able to capture steady and smooth video footage, bringing your creative ideas to life.
"