how to balance zhiyun crane v2

Introduction:

Zhiyun Crane V2 is a professional camera stabilizer that is designed to help you capture smooth and stable footage, but getting the right balance with the device can be a bit tricky. If the Crane isn't balanced correctly, it can cause the motor to overwork, or the footage may still appear shaky. In this article, we will guide you on how to balance your Zhiyun Crane V2 to get that perfect, stable shot that you desire.

Step 1: Preparation

Before starting, you should assemble all the necessary equipment such as your camera, lens, Zhiyun Crane V2, tripod, and mounting plate. Ensure that everything is fully charged and in good condition. Also, ensure that your camera's battery door is open, and the battery in place to avoid adding weight later. It is recommended to use a counterweight set, which can save time and help to balance your device quickly.

Step 2: Mounting the Camera

To balance your Zhiyun Crane V2, you need to mount the camera onto it. Start by mounting your camera on the mounting plate and screw it in tightly. Once you've done that, attach the mounting plate to the Zhiyun Crane V2. You will hear a click sound to indicate that the camera is firmly attached.

Step 3: Balancing the Vertical Axis

The next step is to balance the vertical axis of your device. This step is significant because if the vertical axis is not balanced, your camera will tilt sideways, making it harder to shoot steady footage. To balance the vertical axis, adjust the sliding plate back and forth on the Crane until the camera is level. Once it is level, tighten the screw at the back of the sliding plate to keep it in place.

Step 4: Balancing the Horizontal Axis

After balancing the vertical axis, the next step is to balance the horizontal axis. This step involves adjusting the position of the camera so that it does not lean forward or backward. To balance the horizontal axis, move the camera forward or backward until the Crane remains stable.

Step 5: Balancing the Roll Axis

The final step is to balance the roll axis. This step involves adjusting the position of the camera, so it does not roll sideways. To do this, use the roll adjustment knob on the side of the Crane to balance it at a 90-degree angle. Once you've achieved balance on all three axes, your Zhiyun Crane V2 is ready for use.

Conclusion

Balancing your Zhiyun Crane V2 is crucial for capturing smooth, stable footage. By following our guide, you'll be able to balance your device easily and quickly. Remember to take your time and double-check your adjustments at each stage to ensure perfect balance. With a balanced Zhiyun Crane V2, you'll have endless opportunities to take stunning footage that you'll be proud of.