how to put a track back on a bulldozer

A bulldozer is an important piece of equipment in any construction site. It is a powerful machine used to move large quantities of earth, debris, or other construction materials. However, like any other machinery, it can malfunction or break down when you least expect it. One of the most frustrating issues that can occur is when the track comes off the bulldozer. In this article, we will discuss how to put a track back on a bulldozer and get your work back on track.

Tools Required

Before attempting to put the track back on the bulldozer, there are a few tools that you will need. Firstly, you will need a sturdy pair of work gloves to protect your hands. You will also need a pry bar and a hydraulic jack, which will help you lift the bulldozer's track off the ground. Additionally, a set of large wrenches or socket wrenches may be useful if you need to remove any bolts.

Steps to Put the Track Back on a Bulldozer

Now that you have gathered the necessary tools let's discuss the steps to put the track back on a bulldozer.Step 1: Locate the track tensioner - The first thing you need to do is locate the track tensioner. It is typically located behind the bulldozer's cab on the side where the track came off. You will need to loosen the tensioner to take the slack out of the track.Step 2: Raise the bulldozer - Next, you will need to use a hydraulic jack to raise the bulldozer off the ground. You want to lift it just enough where the weight of the bulldozer is not resting on the track.Step 3: Use a pry bar to realign the track - Use the pry bar to realign the track so that the sprockets can engage with the track. You may need to remove any debris that is stuck in the track or clean any mud or dirt that may have caused the track to come off.Step 4: Put the track back on - Once the track is aligned properly, slowly lower the bulldozer back down, allowing the track to fall back into place. Use the pry bar to guide the track as it slides back into position. Step 5: Tighten the track tensioner - Use the wrench to tighten the track tensioner until the appropriate amount of tension is reached.

Conclusion

Putting a track back on a bulldozer is not an easy task, but with the right tools and knowledge, it is something that you can do yourself. Remember to always wear protective gear and take the necessary safety precautions when working with heavy machinery. If you are not confident in your ability to complete this task on your own, call a professional bulldozer mechanic to assist you.